Harman Patil (Editor)

De Hantumermolen, Hantum

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Mill name
  
De Hantumermolen

Storeys
  
Three-storey smock

Year built
  
1880

Type of pump
  
Archimedes' screw

Purpose
  
Drainage mill

Base storeys
  
Single-storey base

Province
  
Friesland

Windshaft
  
Cast iron

De Hantumermolen, Hantum

Mill location
  
Stoepawei 19, 9147 BG Hantum

Operator(s)
  
Stichting Monumentenbeheer Dongeradeel

Address
  
9147 BG Hiaure, Netherlands

Similar
  
De Gans - Ezumazijl, De Huinsermolen - Húns, De Ouderkerkermolen - Aldtsjerk, Slagdijkstermolen - Finkum, Mellemolen - Akkrum

De Hantumermolen is a smock mill in Hantum, Friesland, Netherlands which was built in 1880. The mill has been restored to working order. It is listed as a Rijksmonument, number 38619.

Contents

History

De Hantumermolen was built in 1880 by millwright G R van Wierum of Janum. It was built for a group of five owners with the purpose of draining the 100 hectares (250 acres) Huntumerleeg. Circa 1932, the mill was fitted with four Patent sails. The mill was working until 1957 when a stock broke. The mill was then replaced by a pumping station powered by an electric motor. Restorations were undertaken in 1978 and 1994. The Patent sails were replaced with Common sails when the mill was restored in 1978. A further restoration was undertaken in 1998.

Description

De Hantumermolen is what the Dutch describe as an grondzeiler, a smock mill on a single-storey brick base. The mill is winded by tailpole and winch. The smock and cap are thatched. The sails have a span of 22.00 metres (72 ft 2 in). and are carried on a cast-iron windshaft, which was cast by Prins van Oranje, Den Haag. The windshaft also carries the brake wheel which has 63 cogs. This drives the wallower (32 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the crown wheel, which has 43 cogs drives a gearwheel with 44 cogs on the axle of the Archimedes' screw. The axle of the Archimedes' screw is 370 millimetres (1 ft 3 in) diameter. The screw is 1.61 metres (5 ft 3 in) diameter and 4.91 metres (16 ft 1 in) long. It is inclined at 20° and each revolution of the screw lifts 1,172 litres (258 imp gal) of water.

Public access

De Hantumermolen is open by appointment or whenever the mill is working.

References

De Hantumermolen, Hantum Wikipedia