Operator(s) Gemeente Tynaarlo Storeys Three-storey smock Province Drenthe Year built 1871 Windshaft Cast iron | Purpose Drainage mill Base storeys Single-storey smock Phone +31 592 370 947 Type of pump Archimedes' screw | |
 | ||
Mill name De Boezemvriend
Molen van De Groeve Mill location Hunzeweg 4, 9473 TE, De Groeve Address Hunzeweg 2, 9473 TE De Groeve, Netherlands | ||
De Boezemvriend or Molen van De Groeve is a smock mill in De Groeve, in Drenthe province of the Netherlands which has been restored to working order. It was built in 1871. The mill is listed as a Rijksmonument, number 41097.
Contents
History
De Boezemvriend was built in 1871 by millwright P Medendorp, of Zuidlaren, replacing an earlier mill. It drained the Zuidlaren Polder. The mill worked until 1934, when an electric motor was installed. The mill was derelict in 1960. The windshaft had dropped and the end of a sail resting on the ground. The mill was restored as a landmark over the winter of 1962-63 by millwright Medendorp of Zuidlaren, grandson of the original builder. It had formerly been equipped with Patent sails, but these were not restored. Further restoration to working order took place over the winter of 1989-90. The mill was officially reopened on 5 April 1990. The mill was named De Boezemvriend in 1991.
Description
De Boezemvriend is what the Dutch described as an achtkante grondzeiler - a smock mill without a stage. It has a single-storey brick base with a three-storey smock. The smock and cap are boarded, with vertical boards on the smock. The four Common sails are carried on a cast-iron windshaft which was made in 1894 by the Den Haag millwrights Prins van Oranje. The sails have a span of 20.10 metres (65 ft 11 in). The brakewheel has 59 cogs. It drives the wallower (27 cogs) at the top of the upright shaft. At the bottom of the upright shaft the crown wheel (36 cogs) drives the Archimedes' screw via a gear with 35 cogs.
Public access
De Boezemvriend is open by appointment.