 | ||
The DF-224 is a space-qualified computer used in space missions from the 1980s. It was built by Rockwell Autonetics. As with many spacecraft computers, the design is very redundant, since servicing in space is at best difficult and often impossible. The configuration had three CPUs, one active and two spares. The main memory consisted of six memory units, each with 8K 24-bit words of plated wire memory, with up to 48K words total. Four memory modules could be powered up at one time, resulting in a maximum of 32K words of available memory, though some applications such as the Hubble Space Telescope used fewer memory banks to allow for graceful failure modes. There were three I/O processors, one operational and two backups. The power supply consisted of 6 independent power converters, with overlapping coverage of the operating functions. The processor used fixed-point arithmetic with a two's complement format.
By the standards of 2010, the computer was rather big and slow. It was roughly 45 centimeters (1.48 ft) by 45 centimeters (1.48 ft) by 30 centimeters (0.98 ft), weighed 50 kilograms (110 lb), and had a clock speed of 1.25 MHz. According to a Hubble servicing mission report, when the DF-224 was replaced by a 25 MHz Intel i486, processing power increased about 20×.
The DF-244 was one of the candidate computers for the Space Shuttle, but was not selected. It was also baselined in a version of a reusable Agena upper stage for use with the Shuttle, but this was never built.