Neha Patil (Editor)

Cleopatra (cylinder ship)

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Name
  
Cleopatra

Beam
  
16 feet

Length
  
28 m

Out of service
  
1878

Launched
  
1877

Cleopatra (cylinder ship)

Cleopatra was a "cylinder ship" constructed to convey Cleopatra's Needle from Alexandria to London in 1877.

The obelisk weighed over 200 tons and was encased in an iron cylinder which was then rolled by means of levers and chains down a track into the sea. It was fitted with a deck-house, mast, rudder and steering gear and was manned by a crew of Maltese sailors. This craft was towed to Great Britain by the steamship Olga leaving on 21 September 1877. Captain Henry Carter (who had supervised her construction) commanded the Cleopatra and Captain Booth was in command of the Olga. They arrived at Gravesend on 21 January 1878. The Cleopatra was broken up immediately after the obelisk had been removed on 6 July 1878.

Design

Designed by engineer John Dixon, the Cleopatra was essentially of an iron cylinder 92 feet (28 m) long and 16 feet (4.9 m) diameter containing the obelisk. It was supplemented by a bow and a vertical stern, rudder, two sidewalls, and a mast for sails to stabilise the vessel. A bridge was built to accommodate the crew.

Designed as a floating pontoon, and commanded by Captain Carter, it was to be towed to London by ship the Olga, commanded by Captain Booth.

The cylindrical shape was a clever choice in the context of a constrained budget (private funding by some patrons). Indeed, the cylinder, made of sheet metal riveted curves was literally built around the obelisk, with circular internal partitions used as cradles for the monolith.

Both ends were topped with a crown of planks, the cylinder could ride on the Nile, with minimal effort, using cables driven by winches. Unfortunately, at the time of launching, a concealed rock head in the mud perforation cylinder and created a blocked waterway.

After towing to a dry-dock of the Egyptian Admiralty, the cylinder was turned into a ship by adding an internal ballast made of rails, a bow and a stern with rudder and a roof to shelter the crew and was with a relatively small rig.

Once completed , the ship looked like a primitive submarine, but its seagoing capabilities were more limited and in retrospect, the choice of crossing the Bay of Biscay in the autumn was a risky choice.

References

Cleopatra (cylinder ship) Wikipedia