Status Complete Construction started 1989 Roof 309 m (1,014 ft) Floors 78 | Type Commercial offices Completed 1992 Height 374 m Architectural style Postmodern Architecture | |
 | ||
Location 18 Harbour Road
Hong Kong Address 18 Harbour Rd, Wan Chai, Hong Kong Architecture firm Dennis Lau and Ng Chun Man Architects and Engineers Similar Bank of China Tower, The Center, Shun Hing Square, International Commerce Centre, CITIC Plaza | ||
Central Plaza is a 78-storey, 374 m (1,227 ft) skyscraper completed in August 1992 at 18 Harbour Road, in Wan Chai on Hong Kong Island in Hong Kong. It is the third tallest tower in the city after 2 International Finance Centre in Central and the ICC in West Kowloon. It was the tallest building in Asia from 1992 to 1996, until the Shun Hing Square in neighbouring Shenzhen was built. Central Plaza surpassed the Bank of China Tower as the tallest building in Hong Kong until the completion of 2 IFC.
Contents
- Design
- Triangular shaped floor plan
- Super high rise building
- Maximum clear ceiling height
- Structural constraints
- Steel structure vs reinforced concrete
- Current tenants
- References
Central Plaza was also the tallest reinforced concrete building in the world, until it was surpassed by CITIC Plaza, Guangzhou. The building uses a triangular floor plan. On the top of the tower is a four-bar neon clock that indicates the time by displaying different colours for 15-minute periods, blinking at the change of the quarter.
An anemometer is installed on the tip of the building's mast, at 378 metres (1,240 ft) above sea level. The mast has a height of 102 m (335 ft). It also houses the world's highest church inside a skyscraper, Sky City Church.
Design
Central Plaza is made up of two principal components: a free standing 368-metre-high (1,207 ft) office tower and a 30.5-metre-high (100 ft) podium block attached to it. The tower is made up of three sections: a 30.5-metre-high (100 ft) tower base forming the main entrance and public circulation spaces; a 235.4-metre-tall (772 ft) tower body containing 57 office floors, a sky lobby and five mechanical plant floors; and the tower top consist of six mechanical plant floors and a 102-metre-tall (335 ft) tower mast.
The ground level public area along with the public sitting out area form an 8,400 m2 (90,000 sq ft) landscaped garden with fountain, trees and artificial stone paving. No commercial element is included in the podium. The first level is a public thoroughfare for three pedestrian bridges linking the Mass Transit Railway, the Convention and Exhibition Centre and the China Resource Building. By turning these space to public use, the building got 20% plot ratio more as bonus. The shape of the tower is not truly triangular but with its three corners cut off to provide better internal office spaces.
Triangular shaped floor plan
The building was designed to be triangular in shape because it would allow 20% more of the office area to enjoy the harbour view as compared with a square or rectangular shaped buildings. From an architectural point of view, this arrangement provides better floor area utilisation, offering an internal column-free office area with a clear depth of 9 to 13.4 m (30 to 44 ft) and an overall usable floor area efficiency of 81%. Nonetheless, the triangular building plan causes the air handling unit (AHU) room in the internal core to also assume a triangular configuration. With only limited space, this makes the adoption of a standard AHU not feasible. Furthermore, all air-conditioning ducting, electrical trunking and piping gathered inside the core area has to be squeezed into a very narrow and congested corridor ceiling void.
Super high-rise building
As the building is situated opposite to the HKCEC, the only way to get more sea view for the building and not be obstructed by the neighbouring high-rise buildings is to build it tall enough. However, a tall building brings a lot of difficulties to structural and building services design, for example, excessive system static pressure for water systems, high line voltage drop and long distance of vertical transportation. All these problems can increase the capital cost of the building systems and impair the safety operation of the building.
Maximum clear ceiling height
As a general practice, for achieving a clear height of 2.6 to 2.7 m (8.5 to 8.9 ft), a floor-to-floor height of 3.9 to 4.0 m (12.8 to 13.1 ft) would be required. However, because of high windload in Hong Kong for such a super high-rise building, every increase in building height by a metre would increase the structural cost by more than HK$1 million (HK$304,800 per ft). Therefore, a comprehensive study was conducted and finally a floor height of 3.6 m (12 ft) was adopted. With this issue alone, an estimated construction cost saving for a total of 58 office floors, would be around HK$30 million. Yet at the same time, a maximum ceiling height of 2.6 m (8 ft 6 in) in office area could still be achieved with careful coordination and dedicated integration.
Structural constraints
Steel structure vs reinforced concrete
Steel structure is more commonly adopted in high-rise building. In the original scheme, an externally cross-braced framed tube was applied with primary/secondary beams carrying metal decking with reinforced concrete slab. The core was also of steelwork, designed to carry vertical load only. Later after a financial review by the developer, they decided to reduce the height of the superstructure by increasing the size of the floor plate so as to reduce the complex architectural requirements of the tower base which means a highstrength concrete solution became possible.
In the final scheme, columns at 4.6 m (15 ft) centres and 1.1-metre-deep (3.6 ft) floor edge beams were used to replace the large steel corner columns. As climbing form and table form construction method and efficient construction management are used in this project which make this reinforced concrete structure take no longer construction time than the steel structure. And the most attractive point is that the reinforced concrete scheme can save HK$230 million compared to that of steel structure. Hence the reinforced concrete structure was adopted and Central Plaza is now one of the tallest reinforced concrete buildings in the world.
In the reinforced concrete structure scheme, the core has a similar arrangement to the steel scheme and the wind shear is taken out from the core at the lowest basement level and transferred to the perimeter diaphragm walls. In order to reduce large shear reversals in the core walls in the basement, and at the top of the tower base level, the ground floor, basement levels 1 and 2 and the 5th and 6th floors, the floor slabs and beams are separated horizontally from the core walls.
Another advantage of using reinforced concrete structure is that it is more flexible to cope with changes in structural layout, sizes and height according to the site conditions by using table form system.