Place of origin United States Used by United States Navy Designed 1904 | In service 1904–1922 Designer Frank McDowell Leavitt | |
Type Anti-surface ship torpedo | ||
The Bliss-Leavitt Mark 1 torpedo was a Bliss-Leavitt torpedo adopted by the United States Navy for use in an anti-surface ship role after the E. W. Bliss Company of Brooklyn, New York, which had been building Whitehead torpedoes for the US Navy, began designing and manufacturing their own torpedoes in 1904.
Characteristics
The air flask pressure of the Bliss-Leavitt Mark 1 was 2250 pounds per square inch; the earlier Whitehead models had a lower flask pressure of 1500 psi. The air in the Mark 1 was heated by burning alcohol in a chamber upstream from the engine; the increased air flask pressure and heated air served to increase the range of the Bliss-Leavitt Mark 1 to 4000 yards at 27 knots. However, it used a single vertical turbine wheel rotating about the torpedo's longitudinal axis and driving a single propeller. This caused an unbalanced torque that was sufficient to cause the Mark 1 to have a tendency to roll.
The Bliss-Leavitt Mark 1 was launched from battleships, torpedo boats and cruisers.