Harman Patil (Editor)

Farman NC.470

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Top speed
  
230 km/h

Length
  
16 m

Manufacturer
  
SNCAC

Wingspan
  
24 m

First flight
  
December 27, 1937

The Farman NC.470 (also known as the Centre N.C-470 when Farman was nationalised to form SNCAC) was a French twin-engined floatplane designed as a crew trainer for the French Navy. It was used in small numbers for both its intended role as a trainer and as a coastal reconnaissance aircraft at the start of World War II.

Contents

Development and design

In 1935, the Farman Aviation Works designed as a private venture the F-470, a twin-engined floatplane intended to be used as a crew trainer by the French Navy. A production order for ten aircraft was placed on 8 March 1936, it being intended that these aircraft would use spare floats left over from now retired Farman F.168 torpedo bombers.

In 1936, Farman was nationalised, and merged with Hanriot to form the Société Nationale de Constructions Aéronautiques du Centre or SNCAC. The prototype, now redesignated NC-470, first flew, with a temporary wheeled undercarriage, on 27 December 1937.

The NC.470 was a twin-engined high-winged monoplane of mixed metal and wood construction, with two radial engines mounted on low mounted stub wings. It had a slab sided fuselage, housing the crew of two pilots in a tandem cockpit, a navigator/bombardier in the nose and a radio operator, flight engineer and gunner in the rear fuselage. The aircraft was designed to carry an armament of a single Darne machine gun on an open dorsal cockpit, together with up to 200 kg (440 lb) of bombs.

The first order for 10 NC.470s was completed by mid-1939, together with a single example of the NC.471, powered by a different model of Gnome et Rhône radial engine. Further orders brought production of the NC.470 to a total of 34.

Operational history

While intended as a crew trainer, a shortage of coastal reconnaissance aircraft resulted in NC.470s being drafted into this role, with three NC-470s and the sole NC-471 being used together with three CAMS 55 flying boats to equip Escadrille 3S4 at Berre in August 1939. The NC-470 was also used by the aircrew training school at Hourtin. Fourteen aircraft were captured by Germany during the occupation of Southern France in November 1942.

Variants

NC.470
Main production aircraft. Powered by two 358 kW (480 hp) Gnome-Rhône 9Akx radial engines. 34 built.
NC.471
Revised version, powered by 373 kW (500 hp) Gnome-Rhône 9Kgr engine. One built.
NC.472
Proposed version powered by 447 kW (600 hp) Pratt & Whitney R-1340 Wasp. Unbuilt.

Operators

 France
  • French Navy
  • Specifications (NC.471)

    Data from War Planes of the Second World War Volume Six

    General characteristics

  • Crew: 6
  • Length: 16.10 m (52 ft 9⅞ in)
  • Wingspan: 24.45 m (80 ft 2½ in)
  • Height: 4.85 m (15 ft 11 in)
  • Wing area: 95.0 m² (1,022.6 ft²)
  • Empty weight: 3,717 kg (8,179 lb)
  • Loaded weight: 6,013 kg (13,228 lb)
  • Powerplant: 2 × Gnome-Rhône 9Kgr 9 cylinder radial engine, 373 kW (500 hp) each
  • Performance

  • Maximum speed: 230 km/h (124 knots, 143 mph)
  • Cruise speed: 190 km/h (103 knots, 118 mph)
  • Range: 1,140 km (616 nm, 708 mi)
  • Service ceiling: 6,000 m (19,685 ft)
  • Wing loading: 63.3 kg/m² (12.9 lb/ft²)
  • Power/mass: 0.12 kW/kg (0.076 hp/lb)
  • Endurance: 6 hours
  • Climb to 2000 m (6,600 ft): 9 min 40 sec
  • Armament

  • Guns: 1 × 7.5 mm Darne machine gun
  • Bombs: 4 × 50 kg (110 lb) bombs
  • References

    Farman NC.470 Wikipedia