Top speed 120 km/h Length 18 m Manufacturer Deutsche Flugzeug-Werke | Wingspan 30 m First flight 1916 | |
The DFW R.I, (company designation DFW T26), was a prototype German bomber aircraft of World War I.
Contents
Development
Developed as a private venture by DFW, it was a large biplane of conventional configuration with four engines mounted inside the fuselage, powering propellers on the wings via transmission shafts - two mounted tractor-fashion on the leading edge of the upper wing, and two mounted pusher-fashion on the trailing edge of the lower wing. The DFW R.I was unique, among the Riesenflugzeuge with internally mounted engines, in that each engine drove a separate propeller and was not connected to the other engines or propellers.
After factory tests proved promising, military acceptance trials commenced on 19 October 1916 and led to the aircraft being purchased for the Luftstreitkräfte. Soon thereafter trouble set in, with crankshafts repeatedly failing. This was attributed mostly to the engine design, but new engine mountings and universal joints for each end of the drive shafts were fitted to mitigate the problem, along with extended wings and other improvements.
Operational history
Following these modifications, R.I (R 11/15) was deployed on the Eastern front with Rfa 500 at Alt-Auz, April 1917 to September 1917, from whence it raided Riga during the summer of 1917. On its second combat mission, the R.I crashed due to the failure of two engines, and was destroyed.
Specifications ()
Data from The German Giants
General characteristics
Performance
Armament